Devices for body-composition testing
Model specifications, differences and locations using them. It covers 44 body-composition analysers and 3 additional devices, with documented testing availability for each model.
47 devices
InBody 230
InBody230 is an older model you may encounter at nutrition practices. It helps put weight changes in the context of fat and muscle. Testing is most useful with results explained and compared with previous visits.
57 locations in Czechia
InBody 270
The original InBody270 gives a quick overview of fat, muscle and their distribution. It suits regular diet and training consultations, including testing at different locations. Its output coverage differs from the newer 270S.
43 locations in Czechia
InBody 370S
InBody370S provides a detailed muscle-and-fat overview for training or nutrition consultations. Alongside whole-body values, it shows regional distribution and visceral fat level. It suits repeat monitoring when you will make use of those measures.
18 locations in Czechia
InBody 270S
InBody270S adds whole-body phase angle to routine fat-and-muscle tracking. It is useful if you want to discuss this extra measure in a consultation. Phase angle needs context from your condition and other results, rather than serving as a stand-alone health grade.
14 locations in Czechia
InBody 970
For detailed body-composition and water consultations at medical, sports or research locations. Multiple reports expand the muscle and fat overview with regional water, phase angles and specialist information.
12 locations in Czechia
InBody 770
For detailed nutrition or clinical consultations and training follow-up. Alongside fat and muscle, it provides a dedicated water report, water distribution and phase angles. Testing takes place standing up.
12 locations in Czechia
InBody 380
For following fat and muscle changes at a gym, nutrition practice or mobile testing event. Adds a body-water ratio and whole-body phase angle to the usual overview for discussion during a consultation.
10 locations in Czechia
InBody 370
The older InBody370 provides a clear comparison of fat, muscle and their distribution across repeat visits. Results also cover individual limbs. An explanation helps you decide which findings matter for your diet or activity.
10 locations in Czechia
InBody 580
For following fat and muscle with more detail about individual body regions. At a gym, nutrition practice or clinic, regional water ratios and phase angles add context to your consultation.
6 locations in Czechia
InBody 120
InBody120 is useful for following fat and muscle while changing your diet or activity. A meaningful consultation benefits from the full computer-generated report; the small display shows only part of the results.
5 locations in Czechia
GE Lunar Prodigy Pro
Prodigy Pro is a GE HealthCare DXA system. The brochure distinguishes Primo, Pro and Advance software packages; Pro includes Essential Body Composition Assessment. Fat and lean-tissue outputs require the corresponding scan and software, so the device alone does not establish local service availability.
4 locations in Czechia
Hologic Horizon A
Horizon A is a specific Horizon DXA model with 216 detectors. Its documentation covers regional bone examinations and whole-body analysis. DXA lean soft tissue is distinct from a direct muscle-strength measurement.
4 locations in Czechia
Tanita BC-545
BC-545 InnerScan is a body-composition scale with personal-profile memory. Its manual describes fat and muscle-mass results and graphs for tracking change. This is the original BC-545; specifications from later BC-545N or BC-545F models are not transferred.
3 locations in Czechia
InBody 970S
For a comprehensive consultation when you want to follow water distribution and phase angles alongside fat and muscle. This newer 970 generation offers detailed outputs for clinical, nutrition, sports and research settings.
2 locations in Czechia
InBody S10
The S10 measures composition and body water without requiring you to stand on a scale. Its electrodes attach separately, allowing lying or seated testing. You will mainly encounter it in clinical care and rehabilitation.
2 locations in Czechia
InBody 720
An older detailed analyzer for following body composition and water during nutrition or sports programmes. Research mode adds regional phase angles; your report’s scope depends on the location’s settings.
2 locations in Czechia
Technogym Checkup
Checkup is an assessment station for training consultations. Technogym describes body composition, balance, mobility and cognitive testing followed by training recommendations within its ecosystem. The name alone does not identify the station version or body-composition analyser used.
2 locations in CzechiaGE Lunar Prodigy
Lunar Prodigy denotes a GE HealthCare DXA family. It supports bone densitometry and, depending on software, body-composition analysis. A base name does not identify the Primo, Pro or Advance package or table size.
2 locations in Czechia
Tanita BC-601
BC-601 is a segmental scale for tracking fat and muscle mass in five body regions. Its display sits on a pull-up handle and results can be stored on an SD card. Weight capacity is 150 kg; consistent preparation and interpretation matter when comparing changes.
2 locations in Czechia
Tanita BC-1000
BC-1000 is a body-composition scale that transmits results wirelessly to a compatible receiver. Its manual lists fat, muscle and body water; capacity is 200 kg. BC-1000 Plus is a different version; accessories may vary in a package labelled “PROFI”.
2 locations in Czechia
InBody 520
An older model for following fat, muscle and water during nutrition or exercise changes, and for understanding past results. Includes ECW/TBW and lean-mass distribution across the arms, legs and trunk.
1 location in Czechia
InBody R20
R20 was developed for home body-composition monitoring and also appears in some fitness services. It gives a basic muscle-and-fat overview. For a more detailed consultation, it matters whether the provider also uses the computer report.
1 location in Czechia
Tanita MC-780
The MC-780 family uses multi-frequency segmental BIA to report fat, muscle mass and body water, including regional results. A base designation does not identify the P/S configuration or MA/MA-N generation.
1 location in Czechia
Hologic Horizon
Horizon is a family of DXA systems for bone densitometry. Selected configurations with body-composition software report fat, lean and bone components. A designation without a model letter does not establish which applications a location has available.
1 location in Czechia
Bodystat QuadScan 4000
QuadScan 4000 measures impedance at four frequencies using adhesive electrodes. Alongside estimated fat and fat-free mass, it reports body-water compartments, resistance, reactance and phase angle. Testing is supine; the operator enters height and weight.
1 location in Czechia
Bodystat 1500
Bodystat 1500 is a portable 50 kHz BIA analyser. Using entered weight, height and other information, it estimates fat, fat-free mass and total body water. Hand-and-foot electrode testing is supine; this designation is distinct from 1500MDD.
1 location in Czechia
ACCUNIQ BC300
ACCUNIQ BC300 uses multi-frequency BIA with eight contact electrodes. Results include estimated whole-body and regional fat and muscle for the arms, legs and trunk. Its foldable design supports transport.
1 location in Czechia
Hologic Discovery Wi
Discovery Wi is a specific Discovery QDR DXA densitometer. Its manual includes spine, hips, forearm and whole-body scanning; additional applications may be optional. Check the location’s service description for fat and lean-tissue analysis.
1 location in Czechia
Tanita BC-418MA
BC-418MA is a segmental body-composition analyser. An academic facility’s instrument description lists weight, body fat, fat-free mass and regional outputs. Check the exact device designation, including MA, when booking.
1 location in CzechiaTanita SC-240MA
SC-240MA is a standing BIA platform analyser. It uses one 50 kHz frequency and a 200 kg scale. The manual’s specification table lists weight, body-fat percentage and BMI; separate arm and trunk results are not documented.
1 location in Czechia
Tanita RD-545HR
RD-545HR uses dual-frequency segmental BIA with a handle and app connection. It provides fat, muscle and regional results as well as heart rate. HR distinguishes it from the original RD-545; a scale’s bone-mass estimate is distinct from bone densitometry.
1 location in Czechia
OMRON BF300
BF300 is a handheld body-fat monitor using arm-to-arm BIA. A primary study describes a single 50 kHz frequency, four electrodes and standing measurement with arms extended. Its principal output is estimated body-fat percentage; it is distinct from the BF511 scale.
1 location in Czechia
seca mBCA Alpha
mBCA Alpha is an eight-point BIA analyser using nine frequencies. Documentation lists a 24-second recording, 360 kg capacity and fat, skeletal-muscle mass and phase-angle outputs. The Alpha configuration contains the mBCA 554 platform and mBCA 545 handle.
1 location in Czechia
BOD POD
BOD POD is a body-composition system using air-displacement plethysmography. It determines body volume in an enclosed chamber, a different principle from BIA electrodes or DXA X-rays. The generic BOD POD designation does not identify a generation or optional equipment.
1 location in Czechia
Harpenden Skinfold Caliper
Harpenden is a mechanical caliper for skinfold-thickness measurement, with a 0–80 mm range and 0.2 mm dial graduation. Body-fat percentage is subsequently estimated using selected sites and an equation; the caliper does not directly measure muscle, water or bone density.
1 location in Czechia
InBody 770S
A newer generation for nutrition and clinical follow-up with a detailed water report. Useful for discussing fat and muscle changes in the context of water distribution and phase angle, including individual body regions.
No documented location yet
InBody BWA 2.0
The BWA 2.0 focuses on detailed body-water and composition results. Wrist and ankle clamps also allow bedside testing. Its results are especially useful where muscle changes need to be read alongside water changes.
No documented location yet
InBody BWA 2.0S
The newer BWA 2.0S combines detailed water results with composition and offers a shorter test than the original BWA. Testing can also take place while lying or seated. It is mainly intended for care where a professional follows water distribution and muscle quantity over time.
No documented location yet
InBody 170
The older InBody170 provides a basic overview for weight loss and muscle-building goals. It can also help you follow existing measurements: a consultation can examine changes in fat, muscle and their distribution.
No documented location yet
ACCUNIQ BC720
ACCUNIQ BC720 uses multi-frequency BIA with eight contact electrodes. Results include estimated whole-body and regional fat and muscle for the arms, legs and trunk. BC720 also reports extracellular water and phase angle.
No documented location yetHologic Discovery QDR
Discovery QDR is a family of DXA bone densitometers. The manual lists spine, hip and forearm testing across the series and whole-body scanning on A, W and Wi. A generic QDR Discovery designation does not establish whole-body analysis at a specific location.
No documented location yetTanita MC-780MA
MC-780MA is a multi-frequency segmental BIA analyser. The manufacturer catalogue lists fat, muscle and body-water estimates with regional results and SD-card storage. MA alone still does not distinguish the column-mounted P and separate S configurations.
No documented location yet
OMRON BF511
BF511 is a scale with eight sensors contacting hands and feet. It uses 50 kHz BIA to estimate body-fat percentage, skeletal-muscle percentage and visceral-fat level alongside weight and BMI. It provides a whole-body overview; separate limb results are not documented.
No documented location yet
Nutriguard-MS
Nutriguard-MS measures bioelectrical impedance at 5, 50 and 100 kHz. Standard testing uses four adhesive electrodes on the hand and foot of one side. Body-composition and water estimates are evaluated from resistance and reactance using the relevant software; regional mode requires the appropriate procedure.
No documented location yet
InBody InGrip
The InGrip shows how strongly you can squeeze its handle. This direct hand-strength test complements the muscle-quantity estimate from InBody. It is useful in training, rehabilitation and professional assessment of muscle function.
No documented location yet
Max Pulse
The Max Pulse records an optical pulse wave from your finger. Alongside pulse rate, it analyses waveform shape and, in a longer test, variation in intervals between pulses. It can add a short resting recording to a consultation; it does not measure composition or blood pressure.
No documented location yet
InBody BPBIO750
The BPBIO750 measures blood pressure and pulse with an upper-arm cuff. You sit for the test, with the device guiding arm placement. It adds another aspect to your InBody results: circulatory pressure, which muscle or fat quantity cannot tell you.
No documented location yetUseful comparisons
Compare documented specifications when choosing a location.